13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Light Kit (continued)
Attaching the light kit fitter assembly
2
□
Remove one screw (QQ) from the light kit pan, and loosen, but
do not remove the other two screws.
□
Connect the wires from the light kit fitter assembly (I) to the
wires exiting from the bottom of the fan motor assembly (E) by
connecting the molded adaptor plugs together (black to black,
white to white). Carefully tuck all wires into the light kit pan.
□
Push the LED light kit fitter assembly (I) up to the light kit
pan so that the two loosened screw heads fit into the keyhole
slots. Turn the LED light kit fitter assembly (I) clockwise to
secure.
□
Re-install the screw (QQ) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
Installing the glass shade
3
□
Place the glass shade (J) into the light kit pan (H), aligning the
three flat areas on the top of the flange of the glass shade (J)
with the three raised dimples in the light kit pan (H). Turn the
shade clockwise until it stops.
WARNING:
Do not overtighten when installing the glass shade
into the light kit pan. Allow the glass shade to cool completely
before removing.
H
I
H
J
