9
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan
4
NOTE:
The frequencies on your receiver and hand unit have
been preset at the factory. Before installing the receiver,
make sure the dip switches on the receiver and hand unit are
set to the same frequency. The dip switches on the hand unit
are located inside the battery compartment.
NOTE:
The switch marked ON/DIM controls the dimming
function of the lights: Set the switch to ON to disable the
dimming function. Set the switch to DIM to enable the
dimming function.
Setting the code on the remote
control and receiver
□
Remove the remote control (N) battery cover by pressing
firmly on the arrow and sliding the cover off.
□
Slide the dip switches (KK) to your choice of either up or
down. The factory setting is up.
□
Slide the dip switches (KK) on the receiver (M) to the same
position as set on the remote control (N).
□
Replace the battery cover on the remote control (N).
1 2
3 4
ON
ON
DIM
12V 23A
DIP
