Assembly — Hanging the Fan (continued)
6
Making the electrical connections
If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
□
Disconnect the power and remove the existing wall plate and switch from the wall outlet box.
□
Make wire connections as follows, using the wire nuts.
a.
Wall control wire connection
•
If your wall outlet box (TT) has a ground wire (green or bare copper), connect the wall control's yellow/green
ground wire to it; otherwise connect the wall control's yellow/green ground wire directly to one of the screws from
the wall outlet box (TT).
CONNECT
(From wall control)
Black wire (TO MOTOR L)
Black wire (AC IN L)
Yellow/green ground wire
TO
(From wall outlet box)
White wire
Black wire from wall control's
Outlet box green wire
Black White
Ground
conductor
WARNING:
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.
b.
Fan wire connection
CONNECT
(From fan)
Black fan wire
White wire
Green wire
TO
(Conductor cable between ceiling and wall outlet box)
White wire
White wire from A/C supply source
Ground conductor of 120V supply, it may be a bare
wire or a wire with green colored insulation.
PP
M
G
Yellow/green ground
TT
Black
Black
Black
Black
White
White
Black White Green
12
