I
F
MM
J
K
11
Attaching the light kit mounting
plate to the mounting ring
12
□
Remove one of the three light kit mounting plate
screws (LL) from the mounting ring (JJJ) and loosen
the other two screws. (Do not remove.)
□
Place the key holes in the light kit mounting plate (I)
over the two screws (LL) previously loosened from
the mounting ring (JJJ). Turn the light kit mounting
plate (I) until the light kit mounting plate (I) locks in
place at the narrow section of the key holes.
□
Securely tighten the two light kit mounting plate
screws (LL) previously loosened and the one (LL)
previously removed.
Attaching the LED light kit
and glass shade
Assembly — Installing the Light Kit
14
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Remove one of the three light kit mounting screws
(MM) from the light kit mounting plate (I) and loosen
the other two screws (MM). (Do not remove.)
□
While holding the 16W LED light kit (J) under the fan
motor assembly (F), make the 2-pin wire
connections:
- Red to white
- Black to black
□
Place the key holes in the 16W LED light kit (J) over
the two mounting screws (MM) previously loosened
from the light kit mounting plate (I). Turn the 16W
LED light kit (J) until the 16W LED light kit (J) locks in
place at the narrow section of the key holes. Secure
by tightening the two light kit mounting screws (MM)
previously loosened and the one (MM) previously
removed.
□
Raise the glass shade (K) up against the 16W LED
light kit (J) and secure it to the fan by turning the
glass shade (K) clockwise until snug. DO NOT
OVERTIGHTEN.
I
JJJ
LL
F
