9
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan (continued)
Hanging the fan
□
Carefully lift the fan-motor assembly (E) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly (B)
into the socket of the slide-on mounting bracket (A).
□
Turn the ball/downrod assembly (B) clockwise until it is
seated with the tab of the slide-on mounting bracket (A)
aligned with the slot in the ball.
2
Preparing the remote control
3
□
Remove the battery cover by pressing firmly on the arrow and
sliding the cover off.
□
Install two 1.5V AAA batteries (K) (included).
□
Confirm that the power to the fan is off at either the wall switch or
breaker box.
□
Return power to the fan at the wall switch or breaker box.
□
Press and release the “Learn” button located in the remote’s
battery compartment within 30 seconds of turning on the power.
□
If pairing is successful, the fan’s light kit will flash and the blades
will begin to spin.
□
Replace the battery cover on the remote control.
□
If you want to use a different remote control to control this fan,
Press the “Learn” button for 10 seconds and release. Once pairing
is successful, the fan’s light kit will flash and the blades will begin
to spin.
□
Repeat the above process.
□
The fan can be only controlled by 3 remote controls at the same
time after “Learning”, if you use a forth remote control to handle
the fan, the first remote control will be replaced .
NOTE:
The remote control has already been paired to the ceiling
fan for your convenience. If you have two of the same model fans
in your home, please follow the steps below to control each fan
independently.
NOTE:
The remote control battery will weaken with age and
should be replaced before leaking takes place, as this will damage
the remote control. Dispose of used battery properly and keep the
battery out of the reach of children.
C
D
B
JJ
A
E
0
1
0
1
