11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the accessories
Attaching the fan blades
Attaching the switch cup adaptor
6
1
Attach blade (G) to blade bracket (J) using the decorative
nuts (CC) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(G) and the blade bracket (J) and into the decorative nut (CC).
Repeat for the two remaining holes in the blade (G).
Tighten each screw (AA) securely.
Repeat these steps for the remaining blades.
Remove one screw (QQ) from the black bracket below the
fan motor assembly (D). Loosen, but do not remove the
other two screws.
Align the key hole slots in the switch cup adaptor (H) with
the two screws in the black bracket.
Turn the switch cup adaptor (H) clockwise until the two
screws are situated in the narrow end of the keyholes.
Re-install the one screw (QQ) that was removed in first
step. Tighten all three screws firmly
.
D
AA
G
CC
H
D
Assembly - Hanging the Fan (continued)
Attaching the switch cup
2
Remove one screw (UU) from the switch cup adaptor (H).
Loosen but do not remove the other two screws (UU).
Connect the molded adaptor plug of the receiver (NN) in the
switch cup (E) with the molded adaptor of the fan motor
assembly (D).
Aligning the “L” shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch cup
(E) to hold it in position.
Install the other screw (UU) that was removed in the first
step. Tighten all three screws (UU) securely.
E
NN
UU
H
D
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
switch cup.
IMPORTANT:
It is critical to attach the switch cup using the
quick connector. The fan will not operate unless the switch
cup is connected to the fan.
