STEP 11
Slide the (Q) Left Arm up through the left sleeve of the (N) Coat and slide the forked-hook into the left
“shoulder” slot housing on the (J) Shoulder Ring as shown in Figure 1. Set the (R) Left Hand into
place by sliding the forked-hook into the “wrist” slot housing on the end of the (Q) Left Arm as shown
in Figure 2. Locate the hook & loop closures at the left sleeve of the (N) Coat and secure to the hook
& loop closure at the wrist as shown in Figure 3.
Align the hole on inside of the (R) Left Hand over the end of the left side of the (G) Handle Bars and
slide down to attach and secure, as shown in Figure 4.
STEP 12
Secure the (N) Coat and the (M) Shirt with the hook & loop closures at the back of neck as shown in
Figure 1. Zip up the (N) coat at the front as shown in Figure 2.
Fold the (S) Bandana
as shown in Figures 3. & 4. Attach the (S) Bandana on the (K) Head and tie it as
shown in Figure 5.
STEP 13
Plug the cable from the (I) Function Control Box into the receiving jack on the (T) Fog Machine Adapter
as shown in Figure 1. Insert the (U) Fog Hose into the holes located under the both Exhaust Pipes as
shown in Figures 2. & 3.
Attach the end of the (U) Fog Hose onto the nozzle of your SVI 400 Watt Fog Machine(sold separately)
as shown in Figure 4. Please refer to the Fog Machine Operation Instructions on Page 5.
4/5
T
U
U
D
I
D
E
E
M
1
2
3
K
N
N
S
S
S
N
N
1
3
4
5
2
1
3
4
2
G
Q
Q
R
R
R
If the connector does not fit, insert the adaptor and twist
clockwise, and then re-connect to the nozzle of the fog
machine.
adaptor
SVI 400 Watt Fog Machine
(Not Included)
2 Hose Connector
Nozzle
4
U
