background image

                                                                                                                                                                                                                                                           

 

 

 

 

 

 

 

 

 

 

 

ASSEMBLY for 4ft Spiral Tree 

1      Assemble the Spiral Tree Pole Section and Base Tree 

Stand for Indoor Use 

 
Place the Base Tree Stand (E) on flat ground or surface. Connect the   

Two Pole Sections (D) on top of the Base Tree Stand (E) connecting   

pole with the tapered ends up. Place the Plastic Cap (C) on top of the   

Top Pole Section with the flanged end down. 

2      Assemble the Spiral Tree over the Pole Section and Base 

Tree Stand 

 

Place the Spiral Tree (A) over the assembled Pole Section and align the 

hole on the plastic top over the Pole Section and Plastic Cap. Allow the 

Spiral tree to "drop" down to the ground. Align the bottom of the Star Tree 

Topper with the top of the Plastic Cap (C). Hook the bottom of the Spiral 

Tree to 2 sides of the Base Tree Stand (E) with the hooks attached to the 

wires. (see diagram below) 

3    Assemble the Spiral Tree Pole Section and Base Tree Stand 

for Outdoor Use 

 

Position the Tree Stand (E) sideways so that the sharp Stake end is facing 

down. Insert it into the Ground. Use the Driving Cap (B) , if needed, on top 

of the Base Tree Stand pole by lightly striking it with a hammer to assist in 

inserting the Stake end into the ground. (Remove Driving Cap (B) is used) 

Connect the two Pole Section (D) on top of the Stand. Place the Plastic 

Cap (C) on top of the Top Pole Section. 

 

4    Assemble the Spiral Tree over the Pole Section and Securing 

the Spiral Tree to the Ground 

 
Place the Spiral Tree (A) over the assembled Pole Section and align the hole 

on the plastic top over the Pole Section and Plastic Cap. Allow the Spiral tree 

to "drop" down to the ground. Align the bottom of the Star Tree Topper with 

the top of the Plastic Cap (C). Hook the bottom of the Spiral Tree to 2 sides 

of the Base Tree Stand (E) with the hooks attached to the wires. (see 

diagram below) 

Отзывы: