Common malfunctions and solutions
Malfunctions
Cause
Solution
Treadmill
does
not work
Unplug
Connect the power cord
Emergency Stop device
is not in the right place
Put the emergency stop device on the right
place in control panel
Single wire or power
supply broken
Check signal wire
Switch off
Switch on
Running belt dose
not
move
smoothly
Not enough lubricating
Lubricate with silicone oil
Running belt is too tight
Adjust the intensity of the running belt
E01
Control panel does not
work
Check whether the communicating wire is
broken or unplug
E02
Motor line disconnected
Check whether the motor line is disconnected
or not connect well.
E05
Over voltage protection
Turn off the product and turn on again the
product will be ok.
E07
Emergency stop device
falls off
Put the emergency stop device on the yellow
place of control panel.
Other malfunctions and solutions
1. Control panel does not work
a.Check whether the power cord is connected correctly, whether the switch is on, or whether the fuse
on the control panel is blew.
b.Check whether the control panel is well connected to the display.
c.Check whether the control panel is well connected to the transformer.
2.The HR function does not display well
a.Check whether the connecting line of HR is firmed.
b.Check whether your hands touch the inducting point
c.Please wash your hands and keep your hands wet.
3.Motor does not work
a.Please check whether all wires are well connected.
b.Please check the error code on display.
4.Touching screen does not work well
a.Please check whether the screen is wet
b.If there is too much sweat in your hands.
