3.Adjusting the elastic tendency of running belt
Every treadmill must set the elastic tendency before it leaves factory and after assembly, but
it will become loose after using a period.
Just like it will stuck or slide sometimes, you can turn the adjusting bolt in clockwise direction,
semi-circle a time (left and right at the same time) to adjust the running belt. Don’t make it
too loose or too tight, or the running belt will slide or make motor over load.
4.Running belt deviating.
All running belt is in the right place when it is packaged. But there are some factors will cause
this situation
a.The treadmill is not set flat
b.User does not step on the center of the running belt
C.Caused by 1 or 2 is easy to be solved,
just set the treadmill flat and let it idle for several
minutes can solved the problem.
If the deviating still exist, you can use the 6mm Allen wrench adjust it in a quarter turn.
Deviating is not in the warranty scale, user can maintain it as follow instructions. But please fix it
as soon as you find the problem or it may break the running belt.
1.Running belt slipping: The running belt may slip or have unexpected stop in working time
2.Adjust the blet: Adjust the screws around the belt in clockwise direction for 3 rounds, then
adjust the belt as the belt deviation until the belt return to the middle of the base.
If deviating turns to right, then turn the left
screw in counterclockwise direction,
Turn the right screw in clockwise direction
If deviating turns to left, then turn the left
screw in clockwise direction,
turn the right screw in counterclockwise
Turn the left screw in clockwise direction with
Allen wrench
Turn the left screw in counterclockwise
direction with Allen wrench
