Homburg SE-M135, Руководство пользователя

Страница: 71 / 120

_______________________________________________________User manual Homburg Drain Cleaner type Senior
© Copyright HOMBURG HOLLAND
70
10.4.6 Feeding out the flushing hose from the drainpipe (reeling in)
HINT!
Be sure to reel in the flushing hose as clean as possible to prevent slip and drive
problems with the flushing hose. Proceed as follows to achieve this:
WARNING!
The water pressure must never exceed 5MPa (50 bar).
01.
Slide the end of the overflow hose over the upturned end of the cleaning tube
(fig. 50 pt. 54 and 44).
02. Set the cardan shaft speed to keep a pressure on the pressure gauge of no
more than 3.5 MPa (35 bar) while water flows out of the cleaning tube (fig. 50 pt.
44).
03. Turn the speed control valve (fig. 56F) fully open (counterclockwise).
04. Pull the lever on the left (fig. 56A) backward.
05. Slowly turn the top speed control valve (fig. 56F) clockwise (never shut it!) until
the feeding-out speed of the flushing hose is about 20 metres per minute.