_______________________________________________________User manual Homburg Drain Cleaner type Senior
© Copyright HOMBURG HOLLAND
45
G.
Pressure compensation valve
* Rotate the control counterclockwise to feed more oil to the system
(open).
* Rotate the control clockwise to feed less oil to the system (close).
Setting pressure compensation valve E:
1. Set the tractor rpm at nominal (is about 1300 rpm).
2. Feed the flushing hose some 50 m into the drainpipe.
3. Close speed control valve F.
4. Feed the flushing hose out of the drainpipe at 30 m/min using the
pressure compensation valve G. Read from the metres counter how
many metres a minute are being fed out.
5. Now the pressure compensation valve has been adjusted for the
tractor that is currently driving the machine. This must be done once
for every tractor so don't touch it anymore. When a different tractor is
used, this adjustment must be made again.
H.
Flushing water pressure controller (see fig. 05)
(Screw setting is factory-sealed at 3.5 MPa (35 bar)
* Always use the top hook
A.
Содержание SE-M135
