Homburg SE-M135, Руководство пользователя

Страница: 55 / 120

_______________________________________________________User manual Homburg Drain Cleaner type Senior
© Copyright HOMBURG HOLLAND
54
10.3.2 Matching the cardan shaft and the tractor
01. Lift the machine to minimise the distance between the tractor pto and the water
pump shaft.
02. Support the machine in a sensible manner if the machine is not on the ground
after carrying out the previous action.
03. Check that the cardan shaft matches the manufacturer's specifications.
04. Check whether the cardan shaft can be mounted without modifying its length.
If not, shorten the cardan shaft.
10.3.3 Shortening the cardan shaft
(also refer to the instructions that came with the cardan shaft)
WARNING!
Apply the tractor parking break, switch off the tractor engine and take the tractor
ignition key from the lock.
01. Slide the cardan shaft over the water pump shaft holding the thinnest side of the
protective sleeve down.
02. Check that the spring-tensioned catch of the cardan shaft sits in the recess of
the pump shaft.
03. Slide the cardan shaft fully in.
04. Measure the distance from the rear of the tractor pto to the front of foremost
steel part of the cardan shaft (= for instance 15 cm).
05. Add 1 cm to this distance (= 16 cm).
06. Remove the cardan shaft from the water pump.
07. Take the front section of the cardan shaft (and protective sleeve) from the rear
section.
08. Cut 16 cm off: * front cardan shaft section;