HOLZTECH SD-320 - 240V, Инструкция по эксплуатации

Страница: 11 / 21

Holztech SD320
WWW.HOLZTECH.COM
To avoid tensions when planing, work with smaller feeds and speeds and nicely sharpened
knives.
8.2 Thicknessing
The thicknessing device comprises the following parts:
•
In going roller 0
•
Out going roller P
•
Locker R
•
Reboundlock Q
•
Knives shaft N
•
Connecting lever H
•
Forward feed lever 1
•
Shavings retriever hood L
•
Connecting bolt K
Setting for thicknessing stand using main switch
Before commencing settings switch off machine to still
•
Shift groove guide D in back position
•
Set free connecting lever from angular support of the groove guide and insert and fix the
aluminum rule.
•
Set free connecting lever H and fold forward working tables A and B.
•
Open shavings hood and connect it to the shavings retnever. Set planing height by setting
free
connecting lever K rotating the hand wheel J.
•
Start of automatic feed with feed lever 1.
Working tips:
1.
Set the thickness plate to wished job thickness and then effect connecting.
2. Bring the forward feed lever to upper (off) position.
3. Star machine and switch on feed.
4. Place the job with the smoother side upon the thickness plate and push it to the in going
roller.
Attention! When job has different thickness, always start with the greater thickness side.
If job is jammed decrease clamping.