Holzstar ADH 2540 230V, Инструкция по эксплуатации

Страница: 11 / 26

Installation and connection
ADH-Series | Version 1.02 11
6.1 Scope of delivery
- Planer-Thicknesser
- Convertible chip suction hood
- Integrated suction
- Chip collection bag
- Infinitely adjustable aluminium truing fence from
0° to 45°
- Operating Instructions
6.2 Accessories
- Replacement filter bag ADH 2540
Item number: 5914060
- Replacement filter bag ADH 3050
Item number: 5914061
- Suction hose ADH 2540 & 3050
Item number: 5914062
- Replacement planer blade set 2 St. ADH 2540
Item number: 5914063
- Replacement planer blade set 2 St. ADH 3050
Item number: 5914064
7 Installation and connection
7.1 Requirements for the installation
site
The Planer-Thicknesser must be placed on a level and
solid surface to ensure stability. The installation site
should meet the following criteria:
- The substrate must be level, firm and vibration-free.
- The subfloor must not let any lubricants through.
- The installation or working area must be dry and well
ventilated.
- No machines that produce dust and chips should be
operated near the machine.
- Sufficient space must be available for the operating
personnel, for material transport and for adjustment
and maintenance work.
- The installation site must have good lighting.
- A suction device must be available with a suction ca-
pacity of at least 690 m3/h, min. 20 m/s
- Flow velocity at suction connection; hose diameter
see technical data, max. hose length 4 m.
7.2 Setting up the Planer-Thicknesser
The surface and thickness planer is delivered in one box
and is already largely assembled. Only a few parts have
to be assembled after delivery. With the following steps
the machine is made ready for operation:
Step 1: Check the carton contents for the following.
Fig. 6: Carton contents
CAUTION!
Danger of injury from a machine that is not stable!
Check the stability of the machine after it has been set
up on a stable surface.
CAUTION!
Observe the weight of the machine!
The machine may only be set up by two persons to-
gether. Check auxiliary equipment accordingly for suf-
ficient dimensioning and load capacity.
DANGER!
To ensure sufficient stability of the machine, it should
be bolted to the ground. For this purpose there are 4
holes at the bottom of the machine housing.
DANGER!
Do not connect the machine to the mains until it is
completely and correctly installed.