Safety
SAA 902 | Version 1.03
7
2.7 Safety measures when dealing
with electricity
Please note the following:
To protect yourself against electric shock, have the ma-
chine connected to a suitable and secure electrical outlet
only by a qualified electrician.
- Do not use the extraction system if the switch does
not allow the machine to be switched on or off pro-
perly and if the control components do not reach
their proper operating condition.
- Protect the power cord from heat, oil and sharp
edges.
- Replace a damaged power cord immediately.
- The plug of the connection cable must be splash-
proof.
- The plugs on connection cables must be made of
rubber, non-rigid PVC or other thermoplastic mate-
rial with the same mechanical stability or covered
with this material.
- When laying the power cord, make sure it is not
squashed, bent, or wet.
- Unwind the cable completely when using a cable
drum.
- Periodically check the extension cords and replace
them if they are damaged.
- Do not use defective connection cables.
- Do not make temporary electrical connections.
- Never bypass or deactivate protective devices.
- Only connect the machine with a residual current
device (30 mA).
2.8 Safety measures for the use of
tools
Please note the following:
1. Only use chip bags that are not damaged.
2. Use only original Holzstar filter bags.
3. Immediately replace damaged filter bags. Until re-
placement of the filter bag, the use of the machine is
prohibited.
4. Always use new chip and filter bags.
2.9 Safety measures for processing
1. Do not use the machine for purposes for which it is not
intended.
2. Do not overload the extraction system. She works bet-
ter and safer in the specified performance range. Do
not use the extraction system for heavy work requiring
a more powerful machine.
3. Check the stability of the machine.
4. Note that using tools other than those recommended
by the manufacturer and other accessories may result
in injury to you.
5. Before turning on, check that all repair and adjustment
tools have been removed.
6. This machine is not suitable for receiving hazardous
dust.
7. Wear appropriate personal protective equipment if
necessary. This could include: hearing protection to
avoid the risk of hearing loss; Respiratory protection to
avoid the risk of inhaling hazardous dust.
8. Prior to any maintenance and replacement of chips,
the extraction system must be secured against start-
up.
9. Never reach into the running or currently running de-
vice.
10. Ensure good lighting.
11. To avoid contact with the rotating fan, unused
exhaust ports should always be covered.
12. When working outdoors, non-slip footwear is recom-
mended.
13. Avoid abnormal posture.
14. Keep the workplace free of wood waste and surroun-
ding parts.
15. All protection and safety features must be reinstalled
immediately after repair or maintenance.
DANGER!
The extraction system is subject to the conditions for
electrical equipment. These must be checked for
electrical safety at regular, recurring intervals by a
recognized electrician. The test cycles depend on the
applicable regulations.
DANGER!
Use the machine only for performing normal work.
Respiratory protection
When changing and emptying the chip bag, wear a
dust mask (filter mask with particle filter).
