16
SAA 902 | Version 1.03
S pare parts
11 Spare parts
11.1
Ordering spare parts
The spare parts can be obtained from the dealer or directly
from the manufacturer. The contact details are listed in
chapter 1.2 Customer Service.
Please provide the following key data for inquiries or when
ordering spare parts:
- Device type
- Serial number
- Quantity
- Designation
- Desired shipping type (post, freight, sea, air,
express)
- Shipping address
Spare parts orders without the aforementioned data can-
not be taken into account. The supplier shall deter-mine
the shipping type if no relevant data was provided.
Information on the device type, article number and year
of manufacture can be found on the type plate attached
to the device.
Example
The engine for the Chip extraction unit SAA 902 must be
ordered. The engine has the number 11 in the spare
parts drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (engine) and marked
positon number (11) to the dealer or spare parts depart-
ment and provide the following information:
- Type of device:
Chip extraction unit SAA 902
- Item number:
5923902
- Drawing number:
1
- Position number:
11
DANGER!
Risk of injury caused by the use of
incorect spare parts!
The use of incorrect or faulty spare parts may cause
risks for operating staff and damage as well as mal-
functions.
- Exclusively genuine spare parts made by the manu-
facturer or spare parts authorised by the manufactu-rer
shall be used.
- Always contact the manufacturer if you are unsure.
NOTE!
Using non-approved spare parts voids the manu-
facturer's warranty.