Holzmann EKR10M 230V, Руководство пользователя

Страница: 16 / 23

STORAGE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 16
EKR10m
N O T E
Incorrect cleaning agents can attack the machine or parts of the machine. Do not use
abrasive cleaning agents or solvents that could damage the rubber or plastic parts of
the machine. Observe the information and instructions of the cleaning agent
manufacturer!
 Make sure that the cables are in good working order and that the insulation is not
damaged, otherwise there is danger to life!
 Keep the housing (3) and cable as free of dust and dirt as possible.
 Use a damp cloth for cleaning and a mild detergent if necessary.
 Clean the cable before returning it to the housing.
 Make sure that no water gets inside the cable reel.
 Make sure that the cables are wound correctly.
STORAGE
N O T E
Improper storage can damage and destroy the machine. Store the packed or
unpacked machine only under the intended ambient conditions!
In case of a longer interruption of operation or shutdown, clean the machine thoroughly and then
store it out of the reach of children in a dry environment protected from frost and other weather
influences!
DISPOSAL
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options
available.
If you buy a new machine or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old machine properly.
TROUBLESHOOTING
C A U T I O N
Risk of injury! Disassembly of the machine by untrained personnel may result in
personal injury and should only be carried out by qualified personnel. If the electrical
or mechanical parts have to be replaced or the cable has to be replaced, contact an
authorised sales outlet or a qualified electrician.
Many possible sources of error can be ruled out in advance if the machine is properly connected
to the mains supply.
If the cable becomes blocked during unwinding or rewinding, you should pull the cable several
times or unwind it completely. Then try again.