SAFETY GUI DELI N ES
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
Seit e 2 6
Metalldrehmaschine / metal turning lathe ED 750 FDQ
The m achine shall be used only by t rained persons.
N on aut horized persons, especially children, shall be k ept aw ay fr om t he
w ork area.
Do not w ear loose clot hing, long hair openly or loose j ew ellery lik e neck laces
et c. w hen operat ing t he m achine
They m ight be cat ched by rot at ing part s and cause serious inj uries.
Use proper safet y clot hing and devices w hen operat ing t he m achine ( , safet y
goggles, ear prot ect ors, safet y shoes …) ! Do not w ear safet y gloves for oper-
at ing because t hey decrease t he w ork ing accuracy and t hey m ight be pulled
int o t he sa w blade.
Before any m aint enance you have t o disconnect t he panel saw from t he
pow er source. N ever use t he plugged cable for t ransport ing or m anipulat ing
t he m achine.
Operator must read the instruction carefully before operating the machine, and the man-
ager of safety department should assure the operator knows the requirements well.
The operation, maintenance and repair of the machine must be done by qualified person
who have been trained to have the ability to forecast the potential risks. Only safety-
conscious persons who are fully aware of the risks can operate the machine.
To those people who assemble, operate, or maintain the machine must be confirmed to
have read and understood the operating instructions.
After stopping the machine, the tool will still run for a period of time due to inertia, do not
open the tool guard and touch the tool with your hand before it comes to stop running.
Do not detach or modify any part of the safety guard. The machine should be discon-
nected from the power supply during maintenance or repair.
W ARN I N G! N EVER CON TACT THE CUTTERS AN D OTH ER DRI VI N G PARTS W I TH
H AN DS I F TH EY ARE STI LL M OVI N G
Assign special persons to operate, maintain and adjust the machine.
Operate the machine in technically perfect condition. Only the producer or qualified person
can completely repair the machine.
Stop the machine immediately if abnormal phenomena appear, check and repair the ma-
chine by specialized persons in time.
Disassembly and assembly the machine with the hoisting equipment, which is of enough
load capacity.
Observe all safety instructions and warnings attached to the machine, make sure they are
always complete and perfectly legible.
Do safety inspection before operating. Ensure the stroke limit switches, stop block and
emergency stop button safe and reliable.
Reinstall the removed guards and safety devices in place after maintaining.
