TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
15
WT1700
•
Ensure a clean working environment.
•
The
product
may only be operated, serviced or repaired by persons who are familiar with it
and who have been informed of the hazards arising from this work.
•
Wear suitable work clothing and footwear.
•
Always work with care and the necessary caution and never use excessive force.
•
Do not work on the
product
if it is tired, not concentrated or under the influence of
medication, alcohol or drugs!
11.4
Special safety instructions for that product
•
Observe the permissible loading capacity. Do not overload the
product
!
•
Pay attention to the correct distribution of the load on the table. Do not concentrate the
load on one side.
11.5
Hazard warnings
Despite their intended use, certain residual risks remain. Due to the design and construction of the
product, hazardous situations may occur when handling the products, which are identified as
follows in these operating instructions:
DANGER
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
CAUTION
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTICE
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the product.
Safe working depends first and foremost on you!
TRANSPORT
For proper transport, follow the instructions and information on the transport packaging
regarding centre of gravity, attachment points, weight, means of transport to be used and
prescribed transport position, etc.
Transport the product in its packaging to the place of installation. When lifting, carrying and
depositing the load, make sure that you are in the correct posture:
•
Lifting, Depositing
Ensure stability when lifting / setting down (legs hip width).
Lift / lower load with bent knees and straight back (like weightlifter).
Do not lift / lower the load jerkily.
