HOLZMANN MASCHINEN VD 1100N, Руководство пользователя

Страница: 30 / 65

TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 30
VD 1100N
14.3 Disposal
Observe national waste disposal regulations. Do not dispose of the machine,
machine components or operating materials in residual waste. If necessary,
contact your local authorities for information on available disposal options.
If you buy a new machine or an equivalent machine from your retailer, he is
obliged in certain countries to dispose of your old machine properly.
15 TROUBLESHOOTING
W A R N I N G
Danger due to electrical voltage! Manipulating the machine when connected to the
power source can cause serious injury or death. Always disconnect the machine from
the power supply before troubleshooting and secure it against unintentional restarting!
Repair work may only be carried out by qualified personnel!
Problem Possible cause Remediation
Motor does not start
- No voltage in the power
supply system
- Check fuse box
- Disconnect the power plug,
check and use a new cable if
necessary
- Have an electrician check it
Machine stops during
operation
- The tool is too blunt and
overloads the motor
- One phase does not
conduct current (400V)
- Tool is incorrectly applied
to the workpiece
- Sharpening tools
- Inspection of all leading
phases and supply lines by a
specialist
- Obtaining and applying
information on turning
techniques