HOLZMANN MASCHINEN TAS 165, Руководство пользователя

Страница: 28 / 85

ASSEMBLY AND OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 28
TAS165 / TAS 165PRO

When the saw blade has reached full speed, press it down against the workpiece. The
depth of the saw blade is limited to 2.5 mm for this function.

The arrow at the 0 mark must be in line with the saw line.

Move the saw forward smoothly and even.

Once you have finished sawing, release the on/off button and lift the plunge saw off the
workpiece. Do not put the saw down until the blade has completely stopped running.
11.3 Sawing

Set the function selector(15) to the sawing position.

Adjust the cutting depth by using the lock knob(7) and check the cutting depth on the
depth scale (9).

Press the plunge lock button and the on/off button(2) to start the saw.

Once the saw blade has reached full speed, press it down against the workpiece.

The cutting depth varies wheter you use the guide rail or not. Remember that!

Move the saw forward smoothly and even.

Once you have finished sawing, release the on/off button and lift the saw off the
workpiece.

Do not put the saw down until the blade has completely stopped running.

The cutting width marks(13) indicate the position of the saw blade when plunge sawing.
11.3.1 Free Plunge Mode
•
Move the mode selector to the free plunge position.
•
Set the desired depth of cut. (Ensuring the track compensation feature is in the up
position when not using the track).
•
Press the plunge lock button and rotate the cutting head forwards and cut to the required
depth of cut.
11.3.2 Bevel Cutting
•
Loosen the front and rear bevel knobs.
•
Adjust to the desired bevel angle.
•
Lock the bevel knobs and begin cutting.
•
Note: the cutting datum line should
be aligned with the ‘45’ marker arrow.