ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
24
SHT310 | SHT310PAR
Assembly frame
Connect the frame components 1,2..5 with the
corner connectors 2-1,3-1,5-1 each with 2
screws and washers as well as the corner
connectors 2-4, 3-4 and 5-4 each with 3
screws and washers to form the frame.
NOTE: Make sure that the vertical frame parts
are correctly arranged. Large hole (6) must be
on the inner side of the frame and hole (6)
must be above the centre
Assembly stopper, handle
Attach the two stoppers (S) to the frame.
Adjust the correct distance to the table top
after assembly and fix the position with the
lock nut.
Fix the handle (1) to the corner connector on
both sides of the frame using screws and nuts
(2+3).
Assembly spring plate stopper
Attach the spring (F) of the stop and release
mechanism of the plate stop (1) to the frame
as illustrated.
16.1.5
Assembly of plate lifting frame SHT310PAR on the movable lifting table
SHT310
Assembling the swivel mechanism
Connect table fixing (1) and fixation (2) with a
rod (5). Fix worm screw (3) and allen screw
(4) to the rod (5).
Place the washer (6) on the inside of the table
fixation and lock it in position with the screw
(7) after adjusting the correct distance of the
rod.
Fix the distance of the rod after the lifting
frame is in place.
