OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
17
PDB3200
14.4
Pneumaical connection
•
Install a suitable compressed air connection
on the pressure reducer.
•
Working pressure: 6 bar
15
OPERATION
15.1
Operating instructions
•
Before any adjustments, the machine must be disconnected from the compressed air supply
to avoid the risk of accidental switching on the machine!
•
Before operation: Check if compressed air supply is present and correctly adjusted.
•
Align the pressure beam parallel and at a minimum distance of 15 mm from the saw blade
cover.
•
To avoid jamming between the workpiece and the pressure beam during the clamping pro-
cess, keep hands/fingers and other body parts away from the pressure beam.
15.2
Handling
15.2.1
Clamping/releasing the pressure beam
Clamping:
Push button 1: Pressure beam 1 is clamped
Push button 2: Pressure beam 2 is clamped
Releasing
:
Pull out button 1: Pressure beam 1 is released
Pull out button 2: Pressure beam 2 is released
16
CLEANING, MAINTENANCE, STORGE, DISPOSAL
16.1
Cleaning
N O T E
Wrong cleaning agents can attack the varnish of the machine. Do not use solvents, nitro
thinners, or other cleaning agents that could damage the machine's paint. Observe the
information and instructions of the cleaning agent manufacturer!
Regular cleaning is also a prerequisite for the safe operation of the machine and its long service
life. Therefore, clean the device after each use and remove dust and dirt.
