TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
32
KAM535
16.3
Storage
NOTE
Improper storage can damage and destroy important machine parts. Store packed or
unpacked parts only under the intended ambient conditions!
When not in use, store the machine in a dry, frost-proof and lockable place to prevent the for-
mation of rust on the one hand and to ensure that unauthorised persons and in particular children
have no access to the machine on the other hand!
16.4
Disposal
Observe the national waste disposal regulations. Never dispose of the ma-
chine, machine components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options availa-
ble.
If you buy a new machine or an equivalent device from your specialist retail-
er, he is obliged in certain countries to dispose of your old machine properly.
17
Troubleshooting
WARNING
Handling the machine with the power supply up can lead to serious injuries or even
death. Always disconnect the machine from the power supply before servicing or
maintenance work and secure it against unintentional or unauthorised reconnection!
Many possible sources of error can be excluded in advance if the machine is properly connected
to the mains.
If you are unable to carry out necessary repairs properly and/or do not have the required train-
ing, always consult a specialist to solve the problem.
Trouble
Possible cause
Solution
Machine does not start
NOT AUS Schalter aktiviert
Switch or a phase is broken
Overheating protection activated
Turn the EMERGENCY STOP
switch to the right to unlock
Repair the defective switch or
phase
Let the heater cool down
Glue is applied to rollers
too much glue added
Decrease glue supply
Edge band is not glued
optimally
too little glue is added
Increase glue supply
