HOLZMANN MASCHINEN HUB25KG, Руководство пользователя

Страница: 20 / 31

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 20
HUB25KG
16.2 Operation
16.2.1 Raise:
Move the load lever to the lowest position and perform pumping
movements with the tiller arm.
16.2.2
Lower:
Pull the load lever upwards and hold until the fork frame has
lowered to the desired position. The load lever moves to the initial
position when released.
Optional: with foot pedal (see picture left)
16.2.3
Drive position:
When moving a load, the load lever must be set to the center
position.
16.2.4
Breaking:
To brake, move the hand drawbar against the direction of travel and slow down the lift truck with
muscle power.
Emergency Stop:
 Pull load lever upwards.
=> The load is lowered and slowed down by the ground.
 In addition, brake the pallet truck as described above.
16.2.5 Weighing
The weighing function is activated by pressing the („ON/OFF“) button on the Display.
The following functions are available:
- Weighing method for gross weight (total, for example, with pallet)
Press the ZERO button to set the gross weight to 0, place the forks under the pallet and check
that the load is correctly balanced. Move the control lever to the "lift" position, pump with the
handle until the load to be weighed has completely lifted off the ground. When the displayed
weight is stable, the gross weight of the goods (total weight of pallet and goods) is displayed.
- Weighing procedure for the net weight (e.g.: without pallet)
To display the weight of the goods without the weight of the pallet (or other container):
- Weigh individual standard pallets, for example: Weight of the pallet: 40kg.
- Press the ZERO key, the display will show "0kg".
- Remove the pallet from the forks, the display will show "-40kg".
- Weighing the goods on the pallet, if the indicator is stable, the weight of the goods is displayed.
(without pallet = net weight)