HOLZMANN MASCHINEN GBM25, Руководство по эксплуатации

Страница: 25 / 60

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 25
GBM25; GMB25T
15.1 Start / Stop
On/Off-switch:
 Start : press green button (I)
 Stop: press red button (O)
Emergency Stop:
Press emergency stop button only in case of emergency. The locking of
the button remains in place until it is manually unlocked.
15.2 Set Direction of Rotation
Direction rotation switch.
The direction of the machine can be set by the direction rotation switch.
»R« means right direction (clock-wise), »L« means left direction
(counterclock-wise). For each direction two spindle speed levels are
available (1R, 2R bzw. L1, L2).
15.3 Gear Lever
N O T I C E
Changing the speed level for rotating drill spindles can damage the machine. Before
changing the speed level turn off the machine and wait for a standstill of the drill
spindle!
Selection of the spindle speed: Corresponding to
position of the gear lever in the table and the position of
the direction roation switch (1 or 2) the spindle speed can
be selected.
15.4 Drill Depth Adjustment
Adjusting the drill depth: To drill multiple holes at the same depth,
use the drill depth adjustment. To do this, loosen the drill depth stop,
adjust the desired depth with the help of the scale, and then fix the drill
depth stop again.