Instruction Manual: Hot Tub
30
5.4.2
Assembling the drinks shelf
Please also see our video instructions, which you can access via the following link / QR code, for
a detailed explanation of how to assemble the drinks shelf.
https://holzklusiv.de/montage1
Please follow the steps below to assemble the drinks shelf:
1.
We recommend testing the hot tub a few times beforehand so that you know where
your favourite spot is.
Remove the parts stored securely in the stove and in the tub. The following parts must be included in the scope of
delivery of the hot tub (see Figure 18)
Mark the two positions of the top edge of the shelf brackets approx. 10 to 13 cm from the bottom edge of the tub
(see Figure 18
2.
The manufacturer recommends this mounting position so that you are able to close the
optional insulated cover completely. Make sure that the two top edges of the shelf
brackets are in balance.
Screw the two shelf brackets into place using the screws supplied. Position the shelf on the two shelf brackets so
that it is exactly in the centre (see Figure 18).
3.
Mark the places for the screws on the shelf board and pre-drill the holes to avoid cracks
in the wood and turning the head of the screw off.
4.
Screw the shelving board in place using the screws supplied.
Figure 18:
Scope of delivery, marking the assembly position for the top edge of the
shelf brackets, positioning of the shelving board
Shelf bracket
Shelving
board
Shelving
board
