P a g e
|
17
Kakute F4 AIO
•
If you are using SmartAudio or ImmersionRC Tramp Telemetry to control your video transmitter:
on the UART6 line, in the Peripherals column, choose either TBS SmartAudio or IRC Tramp,
depending on which type of transmitter you are using.
Configuration
Click on the “Configuration” tab on the right side of the window. Scroll down to the “Other Features”
section.
•
If you are using SmartPort telemetry, enable
TELEMETRY.
•
If you are using a programmable LED strip,
enable LED_STRIP.
•
The Kakute F4 AIO has a built-in Dataflash chip
for blackbox logging. If you intend to use this
feature, enable BLACKBOX.
•
Air Mode increases authority when the
throttle is all the way down. We recommend
leaving this option on all the time.
•
The Kakute F4 AIO has built-in Betaflight OSD.
The OSD option should always be enabled,
unless you want to turn off the OSD for some
reason.
Next, go to the Receive section of the “Configuration” tab. Since the Kakute F4 AIO only support serial-
type receivers, configuration of this section is simple.
•
Set the Receiver Mode to “Serial-based
receiver”.
•
Se the Serial Receiver Provider to the type that
matches what kind of receiver you have. FrSky
and other SBUS receiver should use SBUS.
Spektrum Satellite receivers should use
SPEKTRUM2048 or SPEKTRUM1024 depending
on whether they are DSM2 or DSMX. FlySky
receivers use iBus. These are the most common serial receiver types that are likely to be
encountered.
Blackbox
If you have enabled the Blackbox feature, go to the Blackbox tab on the right-hand side of the window.
In the Blackbox tab, at the top, set the Blackbox Logging Rate to 1 kHz.
