Please Note:
letter
A
or
B
is printed on each propeller; Make sure all propellers are assembled in
correct orientation according to the image above.
1. A small screwdriver is needed to assemble the landing gear and propeller guards.
2. Insert the two landing gears into the bracket holes at the bottom of the drone, then secure with
the four screws tightly.
3. Insert all four propeller guards into the holes located on the motor base, secure with the four screws
tightly.
Propeller
Guard
Propeller
Landing Gear
Lightweight
Frame
A
A
B
B
Counterclockwise Motor
(Black and White Wire)
Clockwise Motor
(Red and Blue Wire)
Drone Assembling
-3-
Parts of the Drone
