39
I. BASIC SETTING
A. Power saving:
ON
B. Display (GM-305-DT, GM-305-HT only):
(i) Interesting point:
Waypoint only
(ii) Road:
All Roads
C. Cursor speed:
Low Speed
D. Distance measuring:
OFF
E. Map orientation:
North Up
F. Time:
Greenwich Time
G. Navigation:
ON
H. Datum:
WGS 1984
I. NMEA output:
OFF
J. Waypoints:
Starts from W001
K. Routes:
Starts from R001
L. Waypoints & Routes
Saved in built-in memory.
Will
remain in memory
when downloading new map.
M. Track log:
OFF
Saved in built-in memory. Will
remain in memory
when downloading new map.
(i) Recording mode
(a) Distance:
50m
(b) Time:
10sec
(ii) Show:
OFF
(for saved track logs)
N. Down load / Up load program port:
COM1
(305v100.exe)
II. SPECIAL ENGINEERING SETTING
Both pages as Fig. 7-0-1 and Fig. 7-0-2 are engineering setting. If you are not a specialty,
please
do not Configure it. The setting is displayed only vertically, not horizontally. Once a
mistake has
been made, please do as follows:
A. Press and hold
”
” for 2 seconds
satellite page as Fig. 7-0-1.
B. Press “ ” as Fig. 7-0-2.
C. Press ”
”.
D. Move the marked field to “
ˇ
” and
press
”
”.
Fig. 7-0-1
Fig. 7-0-2
