Holtkamp Electronics SUNCASH engl. techn. Stand 04.2016 4047_04.2016 V09.2019
- 16 -
Your SunCash is factory setting with a standard program-
ming. You see the program values in the follows:
Language
Deutsch
Here the possibility is ordered to select between different langu
-
ages. The following languages stand to the selection: German,
Italian, English, Norwegian, Danish and Swedish.
Coin tester value
K1:
0.5 EUR
The coin tester value channel 1 offers the possibility, to set the
channel values for channel 1. The values can be set in steps of
0.1, from 0.0 to 999.9. With the
RESET
and
PLUS
button you
can alter the number values, with the
OK
button you switch to
the next menu item. The set values should always correspond to
the actual values
With the setting 0.0, the equivalent valued channel of
the electronic multiple coin tester will be automatically
disabled.
Coin tester value 2-6
Analogue coin tester value channel 1
Channel 2: 1.0 EUR
Channel 3: 2.0 EUR
Channel 4: 0.0 EUR
Channel 5: 0.0 EUR
Channel 6: 0.0 EUR
Note reader value
K1:
5.0 EUR
The note reader value channel 1 offers the possibility, to set the
channel values for channel 1. The values can be set in steps of
0.1, from 0.0 to 999.9. With the
RESET
and
PLUS
button you
can alter the number values, with the
OK
button you switch to
the next menu item. This setting should always correspond to the
actual value of the bank notes!
With the setting 0.0, the equivalent valued channel of
the electronic bank note reader will be automatically
disabled.
Note reader value 2-6
Analogue note reader value channel 1
Channel 2: 10.0 EUR
Channel 3: 20.0 EUR
Channel 4: 50.0 EUR
Channel 5: 0.0 EUR
Channel 6: 0.0 EUR
Coin value hopper
1:
2.0 EUR
The coin value hopper 1 offers the possibility, to set the value
of the money pieces or tokens which are to be found in the coin
hopper 1. The value can be set in steps of 0.1 from 0.0 to 999.9.
With the setting 0.0 the hopper is inactive. If the coin value of
hopper 1 and 2 is set to 0, the money change function will be
inactive. By that a new standard operating type is active: card
sales. Therefore in the display will appear “
Card deposit
”.
With the
RESET
and
PLUS
button you can alter the number
values, with the
OK
button you can switch to the next menu item.
This setting should always correspond to the actual coin value!
EMP chan. hopper
1:
3
To adjust is here the assignment, which coin (designates by their
EMP channel) falls in hopper 1. This is important for the calcula-
tions of the fill difference.
EMP chan. hopper
2:
0.0 EUR
Analogue coin value hopper 1
If no second hopper is installed, the value should be abso-
lutely adjusted to "0“!
