Holtkamp Electronics SUNCASH engl. techn. Stand 04.2016 4047_04.2016 V09.2019
- 14 -
12 Chip card types
There are various chip card types for customers as a means of
payment. Further for the programming of standard and special
functions various service and enquiry cards.
In the following table you will find an explanatory list of the type
of available chip cards.
Chip card type
PIN-CARD
Function
P11
revaluable chip card for customer
P33
Chip card for querying the statistics and deleting the daily counters
(for owner/staff)
P43
Chip card for querying and deleting the statistics
(Exclusively for the owner / Caution: Danger of manipulation!)
P53
Menu programming chip card
(Exclusively for the owner / Caution: Danger of manipulation!)
P73
Chip card for activating the initialization function
(for owner / staff / Caution: Danger of manipulation!)
13 Programming
13.1 Explaning the programming positions
In the programming mode the SunCash has three different pro
-
gramming menus: the
Configuration menu
, the
Bonus menu
and the
Card initialisation menu
. With the help of the key pad
on the SunCash and the appropriate chip cards, you can move
about the menus as follows.
Through pressing the
RESET
button, the adjusting value is re-
duced, through pressing the
PLUS
button, the adjusting value
is increased. Through pressing the
OK
button you change to the
next programming step. The menu is left and the card rejected,
when the menu has been completed.
Which program position in which menu is to be found and what
they mean is explained as follows.
It will always be declared, that DIP switch Nr. 3 must be
set at on for programming. The DIP switch should also
stay at this position after the programming.
13.1.1
Configuration menu
The configurations menu offers you the possibility to do all the
programming concerning the values for the hopper, coin tester
and bank note reader in this menu.
The value adjustments take the first program positions. The valu
-
es offers you the possibility, the value of the inserted or paying
out coins or notes for the SunCash to be set individually. They
are already factory set and on the installed coin tester/bank note
reader adjusted and may only be changed in the following cases:
●
If a coin/bank note tester for foreign currency has been in-
stalled later.
Only possible after consultation with Holtkamp.
●
If the value of the token is to be changed.
●
If one or more kinds of coins or notes are to be banned.
● If other kinds of coins are to be used when filling up the
hopper.
Only possible after consultation Holtkamp.
Your SunCash is fitted with an electronic multiple coin tester
(EMP) and a bank note reader. Because of this it can read and
accept six different coins and notes. Should a coin or note be
paid in, it notes just the insert, do not know yet which value the
coin or note has for your SunCash. This evaluation is achieved
with the help of the channel value program.
haben soll. Diese Wertzuschreibung erfolgt mit Hilfe der Pro-
grammierung der Kanalwertigkeiten.
