background image

HOLT HGW30 Stump Grinder

 

Operator’s Manual

     |     

3

1.  INTRODUCTION

Thank you for purchasing a Holt Industrial HGW30 Stump 

Grinder.

You must read, understand, and follow all instructions in this 

manual before operating, adjusting or servicing this machine.

If you do not understand any part of this manual or you are 

unsure about any aspect of this machine, contact Holt Industrial.

Information provided in this manual was current as of the issue 

date.

Information furnished in this manual does not include all of the 

details of design, production, or variations of equipment. It does 

not cover all the possible contingencies, which may arise during 

operation or maintenance.

Should special issues arise, or further information be desired, 

contact your dealer.

This manual covers the Holt Industrial HGW30 Stump Grinder 

and is provided to assist in the safe operation and maintenance 

of the equipment.

Equipment modifications from original design and specifications 

without written permission are strictly prohibited.

Modifications  may  compromise  safe  operation  of  machine, 

subject users to serious injury or death and may void any 

remaining warranty.

This operator’s manual does not replace, nor does its use 

discharge the operator from observing all safety codes or 

operating limitations as well as any applicable federal, state, 

provincial or local regulations.

There are three different types of labeling on this machine: 

safety, informative and product labels.

Safety Labels

 are pictorial with a yellow background and 

generally 2 panel. Top panel indicates the potential hazard 

and the bottom panel indicates how to avoid the hazard.

Informative Labels

 are generally pictorial, have a white 

background and can vary to the number of panels. The label 

will illustrate the function of a feature and is accompanied 

by detailed instructions in the owners manual, with the label 

illustrated along side.

Product Labels

 contain product information such as model 

number or serial number.

Содержание ERASER





















Отзывы: