HOLT HGW30 Stump Grinder
Operator’s Manual
|
15
7. Operation
^
Keep bystanders, livestock, pets, etc away from work
area.
^
Always wear protective equipment appropriate for the job.
^
Do not operate, work on or around this machine while
under the influence of alcohol, drugs or if feeling ill.
^
Keep clear of moving machinery at all times.
^
Stop stump grinder engine before leaving operators area.
^
It is your responsibility to operate this equipment safely.
You must be familiar with the equipment and all safety
practices before use.
^
Do not allow untrained or unqualified people to operate
this equipment.
7.1 Pre-Operation Check List
Perform the following checks prior to operation.
• Review and understand this manual and engine operators
manual.
• Verify safety decals are installed and legible. Replace if
damaged or missing.
• Verify that all hardware is tight.
• Inspect hoses and fittings for wear, damage and leaks.
Replace damaged or leaking hoses before use.
• Verify hydraulic oil is at full level on sight glass
• Verify that local utilities have marked all underground
utilities.
7.2 Carbide Teeth Break In
New carbide teeth are razor sharp and can chip and shatter
easily when they hit hard objects. Once the razor sharpness
has worn away, tips do not chip as easily. Observing these
precautions will extend the life of the carbide teeth and reduce
operating expenses.
7.3 Operation
^
WARNING
Prevent serious injury or death.
Keep clear of moving machinery.
^
WARNING
Prevent serious injury or death.
Engine exhaust contains carbon
monoxide. Carbon monoxide is an
odorless gas that can cause death.
Avoid any areas or actions that expose
you or others to carbon monoxide.
^
WARNING
Wear an approved respirator (N95 Type as
a minimum).
Follow local, state and federal
regulations.
The health effects from exposure to wood
dust are due to chemicals in the wood or
chemical substances in the wood created
by bacteria, fungi, or molds.
^
WARNING
Never operate stump grinder when other
people are in the vicinity. Debris can be
thrown several feet from cutting area.
Keep all shields in place.
Содержание ERASER
Страница 1: ......
