TyPE 6.2.0.8-RF
Page 5
Programming the Essex Keypad
1
The Master Code is necessary to do this step.
Master Code “123” is used as an example.
2
Enter
*
1 1 2 3
#
Double Beep Slow Flash Solid
3
Enter
1
#
Double Beep Slow Flash Slow Flash
4
Enter 1st User ID (1-500), followed by
#
Double Beep Slow Flash
Fast Flash
5
Enter 1st User Code/PIN, followed by
#
Double Beep Slow Flash Fast Flash
6
Enter
#
to complete User 1 programming
Triple Beep Slow Flash
Slow Flash
7
Enter 2nd User ID (1-500), followed by
#
Double Beep Slow Flash
Fast Flash
8
Enter 2nd User Code/PIN, followed by
#
Double Beep Slow Flash
Fast Flash
9
Enter
#
to complete User 2 programming
Triple Beep
Slow Flash
Slow Flash
10
Enter
* * * *
Double Beep X 2
Set User Codes
STEP
ACTION BEEP Red LED Green LED
1
The Master Code is necessary to do this step.
Master Code “123” is used as an example.
2
Enter
*
1 1 2 3
#
Double Beep
Slow Flash
Solid
3
Enter
2
#
Double Beep Slow Flash
Slow Flash
4
Enter User ID to be changed (1-500), followed by
#
Double Beep
Slow Flash Fast Flash
5
Enter new User Code/PIN, followed by
#
Double Beep Slow Flash
Fast Flash
6
Enter
#
to complete programming
Triple Beep Slow Flash
Slow Flash
7
Enter
* * * *
Double Beep X 2
Changing User Codes - using User ID
STEP
ACTION BEEP Red LED
Green LED
N
*
Note
: If the User ID, or User Code/PIN has not been assigned, you will hear one long beep
when # is entered.
N
N
N
N
N
Example for entering user code 1 and 2-
* 1 1 2 3 # 1 # 1# 4 5 6 # # 2 # 7 8 9 # # * * * *
Example for changing user code 1-
* 1 1 2 3 # 2 # 1 # 7 8 9 # # * * * *
