Hologic Fluoroscan InSight FD Mini C-arm, Руководство пользователя, Страница: 21 / 88

InSight FD Mini C-arm User Guide
Safety Hazards
MAN-04858 Revision 006 11
Collision Hazard If improperly moved or if the
wheel brakes are not used
correctly, the system could roll
out of control.
If the articulating flex arm is
not locked in place during
transport, the C-arm could
swing out of control and cause
injury to the patient or medical
personnel.
Use caution when
moving the system on
an incline.
Do not move the system
on an incline greater than
ten degrees.
One person can move the
system easily on a level
surface.
Always lock the wheel brakes
before procedures. Never
leave the system unattended
on an incline greater than
five degrees.
Always lock the flex arm
after changing the position
of the C - arm.
Cleaning Safety Almost any liquid spilled into
electronic equipment
automatically becomes a
conductor of electricity.
This system is not waterproof.
If liquid is spilled on the
system, turn the system off
immediately. Do not turn the
system on until the liquid has
dried completely. Do not
splash or spray cleaning
solution on the system.
Clean exterior surfaces of the
InSight FD Console, the
flex - arm, and the C-arm with a
soft cloth or disposable lint-
free tissue moistened with
water, isopropanol or
methanol. Wipe surfaces; do
not scrub.
For additional detail on
disinfectants, see Section 14.3.1
Recommended Disinfectants on
Page 74.
Table 2 Safety Hazards
Safety Hazard Cause Course of Action