HOLMS SH 2.5, Руководство по эксплуатации

Страница: 15 / 24

SH
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
15
Setting the ground pressure
The ground pressure for the sweeper roller can be
adjusted to suit different conditions. This is done using
the adjustment lever (figure 11) when the machine is in
parking mode (figure 12).
1. Adjust the height and tilt of the sweeper roller.
2. Allow the sweeper roller to rotate for a while against
the ground.
3. Then measure the width of the strip that has been
swept clean. This should normally be approx. 15-
25 cm.
4. Reduce the ground pressure by lowering the
adjustment lever.
5. Increase the ground pressure by raising the
adjustment lever (figure 11).
Do not use the carrier’s lifting or tilt function to
adjust the ground pressure.
Always turn the sweeper roller off properly before
making any adjustments.
Lower the attachment, to relieve pressure on the
springs, before making any adjustments.
11.Adjustment lever
12.Supports in parking position