SH
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
17
2. Gently lower the sweeper roller to the ground, release
the sweeper roller from the carrier and back up
slightly.
3. Lower the sweeper roller gate to the lowest position
using the lifting cylinder.
4. Release the quick couplings and any electrical
cabling.
Sprinkler system (extra equipment)
The machine is equipped with a water filter, located by
the pump, to prevent dirt from getting into the system.
The filter can be flushed clean and reused. It must be in
place when the tank is filled, otherwise there is a risk of
the pump and water system being damaged.
When there is a risk of freezing, empty the water from the
water tank, water pump and associated hoses. The easiest
thing is to empty the tank first and then run the pump dry
for 20-30 seconds. When emptying the tank, remove the
hose coupling from the tank.
The brush will become deformed if the sweeper is
not parked on the supports.
Make sure that the system is depressurised before
releasing the quick couplings.
Содержание SH 2.5
Страница 2: ......
