EN
PCT50
916.400.139_002
55
•
Check the blades for damage. Have a Holmatro Certified Technician replace the blades when they
are damaged or the blade tips are damaged or worn.
•
Check whether the blades are straight. Have a Holmatro Certified Technician replace the blades if
there is more than 0.6 mm (C) separation.
8.5.5
Centre bolt
Check that the tightening torque of the centre bolt (B) is 50 Nm.
•
Spray Teflon lubricating oil on and between the moving parts of the centre bolt (B) while the tool is
opening and closing.
8.5.6
Hinge pins
Spray Teflon lubricating oil on and between the moving parts of the hinge pins (A) while the tool is
opening and closing.
8.5.7
Snap rings of hinge pins
Check that the snap rings of the hinge pins (A) are present and are not damaged.
Have a Holmatro Certified Technician mount a new snap ring if it is missing or damaged.
8.5.8
Spreading tips
•
Check the spreading tips for damage. Have the Holmatro dealer replace damaged parts.
•
Check that detachable tips fit good.
•
Check that the pin locks when fully engaged. (as shown in Fig. 8)
8.5.9
Accessories
•
Check the accessories for damage, dirt and completeness. Replace damaged accessories and
make sure that the accessories are complete.
•
Remove dirt with clean running water. Dry the accessories. Apply a thin coat of preservative oil to
the external steel parts.
8.6
Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.7
Packaging
In many regulations such as IATA (air), ADR (road) and IMO (sea), Li-Ion battery packs are considered
as dangerous goods. Please make sure that the goods are packed and transported in accordance with
the latest regulations. Consult your Holmatro dealer for detailed instructions.
CAUTION
The centre bolt may not be removed. Contact a Holmatro Certified Technician.
WARNING
The hinge pins may not be removed.
Содержание PCT50
