background image

                                                        

 

 

4

 
3. Safety 

Instructions 

 
Study these instructions carefully before operating this 
equipment. 
 
 

Never use a Core™ Technology product with a Twin-line hose product. 

Use this equipment only for jobs for which it is designed. If in doubt or  not clear, be sure to 
consult your dealer. 

Always wear personal protection equipment such as safety goggles, helmet, gloves, protective 
clothing and safety shoes. 

Keep spectators at sufficient distance. 

Stand on stable ground and use both hands to hold and/or operate the equipment. 

Hold the equipment only at the appropriate places, i.e. at the deadman's handle and the carrying 
handle. 

Stabilize the objects the tool will be used on. 

Never cut parts under hydraulic and/or pneumatic pressure, at live voltage or mechanical stress. 

Stop immediately if the blades are bent open during cutting. 

The equipment is not designed for lifting or raising loads. 

In the event of oil leakage, stop immediately and consult the troubleshooting list. 

In the event of unfamiliar noise, vibration or other unusual behavior, stop immediately and 
consult your dealer. 

For Twin-line tools, never disconnect the quick-action couplings when the pump is in operation 
and when the pressure relief valve of the pump is in the "Operation" position. 

Store the unit with the blades slightly crossed. 

The safety valves between the couplers must never be adjusted.  In the event a problem develops 
with the safety valve, contact your dealer. 

The equipment must only be operated with non-toxic mineral base hydraulic oil distributed by 
Holmatro. 

Use only Holmatro accessories and parts. 

Observe the maintenance instructions. 

Only trained service technicians, certified by Holmatro, are allowed to repair this equipment. 

Replace safety symbols / pictograms and / or information labels if worn. 

 

4  The tool is equipped with the following 

labels/stickers: 

 

 

1. 

Wear personal protection equipment 

2. 

Dead-man's handle operating direction 

3. 

Warning to prevent parts of the body being pinched/cut off 

4.  

Product identification: model, serial number, year of construction, etc. 

5. 

Grease and lubrication label. 

6. 

Safety / warning Label. 

Содержание CORE XR 4360 RAM





















Отзывы: