PAGE 11
Manual Operations
Run A Single Station
The maximum Run time for a station is 12 hours 59
minutes. To manually run a single station once,
turn
the
dial to
Run Single Station
position and the display will
show:
To adjust the Run Time, use the
button and to advance
to the next station
press
the
next
button.
System Test Facility
This feature can be used to test that your valves and
sprinklers are working correctly.
Turn
the dial to
Run Test
Cycle
and the diplay will show:
The controller will run through all stations for 2 minutes in
sequential order while you go and check your sprinklers.
Note: The system test facility is preset at 2 minutes per
station and can be adjusted using
or
.
Run A Program
To manually run a complete program once for the run
times as set in the automatic schedule.
Turn
the dial to
the
Run Program
position. “Prog 1” will be shown in the
display. To run program 1, leave or advance to program 2
by
pressing
next
.
Programming
Step 3. Set Station Run Times.
(Continued)
To adjust the
Run time
in minutes
press
next
, and use
or
. To set the run time in hours,
press
next
and “0”
will appear and flash. To adjust use
or
. If not
required press
next
and advance to station 2 by pressing
the
button.
Continue until all the stations in Program1 have been set
with a run time or if a station (or stations) is not required
to be active in this particular program, ensure that the
Run time is set to “OFF”.
Note: To set a station to
“OFF”
. Use
when the
“RUN
TIME”
is flashing.
This completes the setting up procedure for automatic
watering of Program 1.
Should you need the second program to have an
automatic schedule,
turn
the dial to “Set Start times” and
“Prog 1” will flash. press
and change to program 2
position and follow the same 3 steps for automatic
watering.
1. Set Starts
2. Set Watering Days
3. Set Station Run Times
Tip: Remember to return the dial to the “Auto Run”
position at the completion of the setting up of the
automatic schedules. This will ensure that the automatic
cycles will take place.
PAGE 10
