background image

PAGE 9

Programming

Odd / Even Day Selection (Optional)

In some regions users are only allowed to water their
gardens on ODD dates if their house number is ODD, or
on EVEN dates when their number EVEN .

This controller allows this to be done simply by setting
the relevant selection of ODD or EVEN and setting the
current date into the controller. The controller will account
for leap years.

If you require the ODD / EVEN day option, simply 

press

the 

next

  

button until 

“Odd”

 is shown. 

Press

 the 

next

button and 

“Even”

 will be shown. This feature may be

required in areas where water restrictions are enforced.

Note: Remember to set the 365 day calendar when
setting the clock, or this feature will be out of sequence.

Step 3. Set Station Run Times

This is the length of time that each station (valve) is
scheduled to water on a particular program. Maximum
watering time is 12 hours 59 minutes for each station. A
station can be assigned to 1 or 2 programs if required.

Turn

 the dial to the 

Set Station Run Times

 position and

the display will show the following:

This means station 1 has a default run time of 10
minutes in program 1. Station 1 will be flashing.

Programming

Step 2. Set Watering Days

This unit has interval watering or individual day selection
from everyday to every 15th day or a 365 day calendar
with odd/even day selection in areas where water
restrictions require this feature.

Turn

  the dial to 

Set Watering Days

.

Interval Day Selection

The display will show:

“Interval 1”

 will be flashing.

This means that watering will occur every day.

To change the interval day, 

press

 the 

 button.

Examples: Interval 2 means watering will take place every
second day, 3 means watering will take place every third
day etc.

Interval watering can be set from everyday to every 15th
day. The 

Run Day

 refers to the number of days before the

next watering schedule will occur.

Individual Day Selection

Press the 

next

 button

This is the 

selectable 

day option.

The display will show:

 This refers to Mon being Day 1. To turn Monday off, 

press

 button. To leave Monday active, leave as is and

advance to Tuesday (day 2) by 

pressing

 the 

next

 

button.

Again 

press

 the 

 button to set the day off if required

followed by 

next

 

to advance. Continue until all seven

days have been set “on”  

 or “off”  

 .

PAGE 8

Содержание dial ezy 4
















Отзывы: