background image

max 2m

The Retractable Hose Reel should be installed 

nearest to your chosen water source for 

convenience of use. Check that the tap to reel 

hose can reach the tap prior to mounting the 

hose reel.

Take the mounting bracket and  place against either a wall or 

wooden post. 

Mark the position of where you would like the screws to be 

placed through the centre of the bracket holes to prepare for 

drilling.

Retractable Hose Reel - Instruction Manual

max 2m distance

from tap

It is very important to use the correct size drill bit, 

so a very secure fit of the wall bracket is made 

before installing the Retractable Hose Reel.

When ready drill all four holes, then hammer the 

wall plugs gently into your wall (if attaching to a 

wall).

distance from tap

IMPORTANT - DO NOT LEAVE TAP 

ON. TURN TAP OFF AFTER USE.

.

Drill Bit

Plug

Bolt

Drill Bit

Drill Bit

Bolt

Plug

Please note that if you are attaching your hose reel to a wooden post, you will not 

require the wall plugs as the coach bolts screw directly into wood. 

Take the wall plugs (supplied with the hose reel) and measure the correct drill bit width 

to use. It is recommended that you drill slightly undersize as masonry materials all have 

different properties and this will ensure the wall plugs have a secure fit.

8mm

10mm

11.7mm

15m/25m (1215H/1225H)

Содержание 1215H













Отзывы: