Holman 1215H, Инструкция по эксплуатации

Страница: 9 / 12

Hose Replacement - 1215H/1225H Models Care & Troubleshooting
Locking bars in the CORRECT position,
clipped to the outer casing.
You will find an indication sticker 1 metre before
the maximum length. Do not pull the hose past
this point (unless when replacing the hose).
When walking the hose back to the unit, turn
off the tap, press the lever on the watering
gun to release the water pressure in the hose.
This makes the retraction to the hose reel a lot
easier and prolongs the life of your hose reel.
If the hose retraction wheel is stuck and the
hose is fully extended, the wheel still has
movement past this point. Grip the hose close
to the guide hole and gently pull.
The retraction wheel will give you enough
movement to unlock itself before you slowly
allow the auto retraction wheel to wind the hose
back into the unit.
Fully Extended Hose
Not Retracting
Warnings
� Do not leave the water turned on with the hose under pressure when not in use.
� Always turn the water off and draw the water from the hose after use.
� Do not attempt to pull hose reel apart.