Hollywood Racks HR3000, Сборка и инструкция по установке, Страница: 8 / 12

Step 5: Assemble tire cages to main frame FOLD THE RACK DOWN PER STEP 4
Per Fig. 21: Locate the main frame’s square bracket and prepare tire cage F and hardware. Install Plastic housing J1
and J2 onto tire cage F (if not already installed).
Per Fig. 22: Before assembly, check that the holes of J1 and J2 are aligned with the holes of tire cage F . If not
aligned, use the hex key or a thin screwdriver to make the alignment. Place the tire cage onto the square bracket
and align the holes. Insert the bolts through the tire cage so they protrude through the square bracket. Install
washers
i-i and nuts j-j onto the bolts using 5mm hex key r-r and wrench d-d (or small adjustable, 3/8” or 10mm).
Tighten so that the tire cage has medium to strong resistance when folding. Repeat for second tire cage.
Try rotating the tire cages forward. There should be medium to strong resistance.
8
Fig. 22
Step 4: Fold-Up/Fold-Down
Per Fig. 20 Pull the rear spring
pin out and rotate the rack
down until the front spring pin
clicks into place.
To return the rack to its
folded position, pull the front
spring pin out and rotate the
rack up until the rear spring
pin clicks into place
.
Fig. 20
Fig. 21