Installation
Installation details and cautions
●
Transmitter side
a) Install 2 omni-directional and high efficiency antennas to transmitter’s
RP-SMA male antenna connectors.
b) There are 3 1/4-20 screw nuts in transmitter metal case, which are
located on surface, rear and bottom. So the user can utilize a 1/4 screw to
ISO518 hot-shoe converter fix the transmitter on camera.
c) Install battery into battery buckle if your product model includes battery
buckle option; please note the battery model must match the battery buckle
type.
d) The user can also utilize a subsidiary LEMO 4 pin male to D-type recep-
tacle power cable to get power input from an outside power source.
e) All TX installation guidelines see below figure.
1
2
3
8
