Operation instruction
g) Before RX setup wireless link with TX, 5 ‘RSSI’ indicators and “video”
indicators will be off; when wireless link is OK, ‘RSSI’
indicators will light first,
and ‘RSSI’
will indicate the received RF signal strength. If the receiver detects
normal wireless video internally from air interface, ‘Video’
indicator will light.
Before that if SDI or HDMI video out port of the receiver has HD monitor
connected it will display an OSD of ‘Link connecting……’
looks like below
picture.
h) The system will spend 20-30 seconds on constructing communication link,
and the real link period will depend on the current wireless channel condi-tion.
When wireless link is set up, ‘RSSI’ light will light and indicate current received
wireless signal strength, as well ‘video’ indicators will light, and then connected
HD monitor will display the video and audio accordingly.
i) For the best wireless transmission performance, it need install the trans-
mitter and receiver more than 2m above the ground and keep the same
height, and make sure no obstacles between them; Moreover, it is the best
to keep the transmitter antennas and the receiver antennas face to face, and
don’t turn round any sides with too big angle. The real transmission distance is
also relevant to current air electromagnetic environment, because the system
works in ISM band,it is exposure to all kinds of 5GHz band air interference, we
suggest the users should do a manual frequency sweep by adjusting frequen-cy
selection knob with a circle before using the equipment, then choose the best
frequency channel for stable performance.
12
