4
UPDATE FIRMWARE:
NOTE:
To use a HyperSpark Distributor with a Sniper, the system must be using these versions of firmware or later:
Handheld: 1.1.7 (tslcd35st_sniper_fw_01_01_0070.fwu)
ECU: 1.1.1 (SNIPER_01010000.eep)
Software: Version 1.1 Build 2
ECU Firmware: From Main Screen. Files>ECU HW/FW Handheld Firmware: From Main Screen. Files> Local Setup
Handheld Setup:
For New Sniper EFI Installations:
From the HOME Screen select Wizards, follow the prompts, on Step 7 you will be prompted to select your ignition type,
highlight Hyperspark Distributor (
Figure 6
), and press Next. Then follow the wizard prompts in the Sniper EFI handheld to
complete the setup Wizard.
Figure 6
Or:
If you already have a running engine with Sniper EFI and are upgrading the ignition system. Instead of re-running
the wizard, you can manually change your ignition type.
From the HOME Screen, select Tuning, next select System, then Ignition Setup, now press Ignition Type, and
select HyperSpark.
