Holley 553-200, Руководство пользователя

Страница: 4 / 26

4
CONNECTIONS
CAN/POWER
Connect the harness from the CAN connector on the
vehicle’s main harness to the 5” Sniper Dash.
A 4 pin male receptacle connector is used to connect to the
Sniper EFI Main Harness.
Once all connections have been made, the Sniper EFI 5”
Dash may be powered up. After a brief initial loading
sequence, the default gauge display will appear.
GPS Antenna Connection
PUSH ON & PULL OFF Connection
DOES NOT REQUIRE TURNING
Handheld CAN Connection
CAN Cable features indexing key and attaches
to the Display via threaded collar. Other end of
cable connects directly to the Sniper EFI
Throttle Body
Micro SD
Card Slot